आपकी मशीन पर चलता है · तभी काम करता है जब आप कहें
AI एजेंट्स के लिए
कंट्रोल प्लेन
- हर एजेंट देखें।
- हर कार्रवाई समझें।
- जो नहीं होना चाहिए, उसे रोकें।
ClawMetry आपकी टीम में पहले से चल रहे 26 एजेंट रनटाइम पढ़ता है, Claude Code और Cursor से लेकर Codex और OpenClaw तक, सीधे उन्हीं फ़ाइलों से जो वे पहले से लिखते हैं। एजेंट में कुछ जोड़ने की ज़रूरत नहीं।
$ pip install clawmetry && clawmetry
7 दिन, हर रनटाइम, बिना कार्ड। उसके बाद $9 या $19 प्रति नोड, प्रति माह।
“claude_code: 84 tool calls, no file changes, not advancing.” Stop or Pause this agent from the ClawMetry dashboard or device.
Verbatim record, not a mockup. A real detection from the laptop ClawMetry was built on. The steps, the counts and the message are what the daemon wrote to disk.
❯ Supported agent runtimes
Don't see the agent harness you use?
Just share it and we'll add support in ~2 days. Leave your email and we'll ping you the moment it's live, plus 2 months of Pro, on us.
We only use your email to notify you and issue the Pro credit. No lists, no spam.
मापा गया, एक इंस्टॉल, चार महीने
यह उन एजेंट्स को फ़्लैग करता है जो अटक जाते हैं,
उन्हें नहीं जो पैसा खर्च करते हैं।
लंबा और महंगा सेशन अक्सर आपका सबसे बेहतरीन काम होता है, इसलिए बड़े आंकड़ों के पीछे भागने वाला टूल गलत चीज़ को खत्म कर देगा। ClawMetry यह देखता है कि एजेंट कुछ बना भी रहा है या नहीं। वही लैपटॉप, चार महीने, दोनों मामले आमने-सामने।
काम कर रहा है · कभी फ़्लैग नहीं हुआ
$171.58
The most expensive session of the four months. It ran long and cost real money, and it was writing code the whole time. ClawMetry left it alone, which is the correct answer.
फ़्लैग किया गया · अटक रहा है
$175.10
Every one caught for the same reason: tool calls with no file changes, the same failure repeating, or a loop that stopped advancing. Most of them cost less than the session on the left.
डिटेक्टर चेतावनी देते हैं। कार्रवाई नहीं करते। उन सातों सेशन पूरे चले। फ़्लैग एक सूचना है, ट्रिगर नहीं। कुछ भी तब तक नहीं रुकता जब तक कोई व्यक्ति उसे न रोके, या जब तक आप खुद खर्च की सीमा तय न करें और कोई एजेंट उसे पार न कर जाए।
165 sessions and $826.47 of agent spend on one developer’s laptop, April to August 2026. One machine, not a customer aggregate. Yours will look different, which is the reason to read your own.
इसे काम करते देखें
एक स्क्रीन। आपके एजेंट्स में हो रहा सब कुछ।
कमियाँ तालिका में ही हैं
हर रनटाइम पर हम क्या कर सकते हैं।
इस श्रेणी का हर वेंडर गार्डरेल्स की बात करता है। यह पूरी मैट्रिक्स है, खाली खानों समेत।
| रनटाइम | निगरानी | चलने से पहले रोकें | बीच में बंद करें | डॉलर में लागत |
|---|---|---|---|---|
| OpenClaw, NVIDIA NemoClaw, Goosefree forever | ✓ | via proxy | ✓ | ✓ |
| Claude Codethe only pre-execution tool gate | ✓ | ✓ | ✓ | ✓ |
| Codex, OpenCode, Aider | ✓ | via proxy | ✓ | ✓ |
| Cursorone IDE process holds every session | ✓ | – | – | – |
| GitHub Copilotbilled in vendor credits, not USD | ✓ | – | – | – |
| NanoClaw, PicoClaw, Kimi CLIno model id on disk | ✓ | – | – | – |
| Qwen, Hermes, Pi, Deep Agents, n8n, Antigravity, Grok, QM, DeepSeek Harness, Exo |
✓ | via proxy | – | ✓ |
चलने से पहले रोकें
Claude Code gets a real pre-execution gate: a PreToolUse hook parks the call before the tool fires. Everything routed through the ClawMetry proxy gets spend refused with a 429 before tokens are spent.
बीच में बंद करें
A gateway kill for OpenClaw, and SIGSTOP then SIGKILL against the process tree for the CLI runtimes, with a guard so a recycled pid is never the one we hit. macOS and Linux. Windows has no SIGSTOP, so pause and resume do not exist there.
बाद में ऑडिट
Every event carries a SHA-256 chain over its immutable fields, per node, with a verifier command. Approval decisions land in an append-only log. Works on every runtime.
अपने लैपटॉप पर डेमन डालने से पहले
यह मशीन पर क्या असर डालता है,
और उससे बाहर क्या जाता है।
उसी लैपटॉप पर मापा गया, अनुमान नहीं।
फ़ुटप्रिंट
clawmetry uninstallThe query server binds to loopback only, with a one-time 32-hex token and a discovery file at mode 0600. It is why the dashboard can read the store without holding the writer lock.
बाहर क्या जाता है, ठीक-ठीक
Never. These stay in the local file.
The key is generated on the node and never leaves it. Decryption happens in your browser. Compelled by a subpoena, we hand over a blob we cannot open, plus the node id, the version and some counters.
स्थानीय फ़ाइल प्लेनटेक्स्ट है
Everything is sealed in transit and at rest in our cloud, and it is not encrypted on your own disk. The DuckDB file carries default user permissions. Anything running as your user can read it.
रिडैक्शन विफल होने पर डेटा खुला रह जाता है
Secrets are fingerprinted at ingest by default, before disk. It is pattern-based, and on an internal error it keeps the original value rather than dropping data. It is tuned for credential shapes, not customer PII.
जुड़े हुए नोड को दूर से बंद किया जा सकता है
If you turn cloud on, Stop, Pause and Resume are reachable from the dashboard and the desk device for any node on the account. That is the feature. Run local-only and no such channel exists.
Starred by the people building AI
Engineers and founders from OpenAI, Google, PostHog and more have starred ClawMetry on GitHub. One of them helped build it.
इसे चलाने की तीन जगहें
Cloud वैकल्पिक है।
हमेशा से था।
डेमन आपकी अपनी डिस्क पर एक DuckDB फ़ाइल में गणना करता है। उसके बाद डैशबोर्ड कहाँ रहे, यह आपका फ़ैसला है, और जो भी चुनें, दर वही रहती है।
01 · Local only
कुछ भी बाहर नहीं जाता
Included in the MIT core
The dashboard reads the local file through a loopback query server. There is no account, no sync and no destination to point at.
- Network destinations: none
- Inbound ports opened: 0
- Free forever for OpenClaw, NVIDIA NemoClaw and Goose
02 · Our cloud
बाहर जाने से पहले सील
$19 per node, per month
The snapshot is encrypted on the node with a key generated there and never sent. Your browser decrypts it. Subpoena us and we hand over a blob we cannot open.
- AES-256-GCM, key held on the node
- Decryption happens client side
- Stop, Pause and Resume reach any node on the account
03 · Self-hosted
आपका इंफ़्रास्ट्रक्चर, सिंगल टेनेंट
$190 per node, per year
One container serves the UI and the ingest API on your own network, with node tokens and admin auth. Licences verify offline against an embedded Ed25519 key you can fingerprint and compare.
- No calls to clawmetry.com beyond an off-by-default version ping
- Same feature set, same runtimes, same rate
- Two months free against the monthly price
डिप्लॉयमेंट बदलने से दर नहीं बदलती। सेल्फ-होस्टेड $19 प्रति नोड प्रति माह या $190 प्रति नोड प्रति वर्ष है, बिल्कुल Cloud प्लान की तरह, क्योंकि आप सॉफ़्टवेयर के लिए भुगतान कर रहे हैं, हमारे सर्वर के लिए नहीं। बदलता सिर्फ़ यह है कि डेटा किसके पास है और कंटेनर कौन चलाता है। किसी से बात किए बिना सेल्फ-होस्टेड की खरीदें।
एक दर, एक मीटर
किसी से बात करने से पहले
अपना आंकड़ा खुद निकालें।
7 days, every runtime, no card
$19per node, per month
Pro, billed monthly. Starter is $9 and covers fewer features, not fewer runtimes. Annual is $190 per node, two months free. Free forever for OpenClaw, NVIDIA NemoClaw and Goose.
Start the trial- Every runtime, including Claude Code, Codex and Cursor.
- Cloud or fully self-hosted, at the same rate. Unlimited chat channels.
- Waste flags, error triage, cost optimizer, OTLP export, tool policy.
- Cancel any time in Stripe. No contract, no seat count.
Already decided? Buy now and install after. Your key is on the next screen.
आपकी लागत कितनी होगी
उन मशीनों को गिनें जिन पर डेमन चलेगा, उन लोगों को नहीं जो उसे देखेंगे।
$551 $6,612 per year · 29 nodes
A node is a machine running the daemon and reporting a heartbeat. The unit of attribution is a machine, so spend maps to a laptop, not to a team. The same number applies self-hosted, so you can price a deployment on your own infrastructure off this figure without asking us. Ephemeral CI runners are not yet specified; the fleet brief carries the rule in writing before you sign.
जोखिम जिनके ज़िम्मे है, उनके लिए
इसे पूरी कंपनी में चलाना।
आपके इंजीनियरों ने पिछली तिमाही में Claude Code, Cursor, Codex और Copilot इंस्टॉल कर लिए। इन्हें किसी ने खरीदा नहीं, और इन सबके पास आपका रेपो और आपकी कीज़ हैं।
एजेंट में कुछ भी इंस्टॉल नहीं करना पड़ता
Each runtime is read from the session store it already writes. No SDK, no wrapper, no second agent on the laptop, nothing a developer has to opt into or can forget.
A control layer that governs only its own SDK is blind to everything a developer runs outside it.SSO का जवाब है सेल्फ-होस्टेड
SSO does not exist yet. Single-tenant self-hosted does: one container serves the UI and the ingest API, with node tokens and admin auth, and licences verify offline against an embedded Ed25519 key you can fingerprint and compare.
A self-hosted deployment makes no calls to clawmetry.com beyond an off-by-default version ping.आपके मौजूदा नेटवर्क में फिट हो जाता है
SIEM and syslog export in CEF or JSON over TCP, UDP or TLS, emitted daemon-side because the cloud never holds plaintext. Corporate TLS interception is supported, with a doctor command that walks DNS, TCP, proxy and TLS in order.
In: your collector feeds us over OTLP. Out: full-event SIEM export. Not yet: correlated spans carrying your trace ids.फ्लीट रोलआउट अभी मैनुअल है
There is no Helm chart, no Terraform provider and no Intune or Jamf package. If a daemon on developer laptops is a non-starter, run the enforcement proxy centrally and govern spend without touching an endpoint.
Auto-update ships on by default. CLAWMETRY_AUTO_UPDATE=0 turns it off. No staged rollout, no version pinning.हर बार पूछे जाने वाले सवाल।
क्या यह किसी चीज़ को चलने से पहले रोक सकता है, या सिर्फ़ बता सकता है कि वह चल गई?
Both, and the split is in the table above. Claude Code gets a genuine pre-execution tool gate, and anything routed through the proxy gets spend refused with a 429 before tokens are spent. For the other runtimes it is detection plus process control: we can see it and end it, we cannot veto the call it already made.
Is ClawMetry only for OpenClaw?
No. It launched in February 2026 as an OpenClaw-only dashboard and many directory listings still describe it that way, but it now reads 26 runtimes: OpenClaw, Claude Code, Cursor, GitHub Copilot, Codex, Gemini CLI, Cline, OpenHands, OpenCode, NVIDIA NemoClaw, Aider, Goose, n8n, Qwen, Devin, Antigravity, Grok, Hermes, Pi, Deep Agents, Kimi CLI, DeepSeek Harness, Exo, NanoClaw, PicoClaw and QM. It auto-detects whichever of those are on the machine, so a mixed fleet lands in one dashboard. OpenClaw, NVIDIA NemoClaw and Goose are free forever in the open source package; the rest are on the paid tier.
क्या यह अपने आप मेरे एजेंट रोक देगा?
No. Detectors write a warning and stop there. On the reference install every flagged session ran to completion. A run ends only when a person ends it, or when you have set a spend cap yourself and an agent crosses it.
क्या इससे मेरे एजेंट के चलने का तरीका बदलता है?
Read-only by default. Two things you opt into change that: the proxy, a separate process you point one env var at, and approval gates, where ClawMetry adds a gate to the runtime’s own permission system and removes only what it added.
मेरा ट्रायल खत्म होने पर क्या होगा?
The paid runtimes stop being read and the free three keep working. Entitlements are a commercial boundary, not a technical one. We do not hard-block a running fleet on a licence check.
इसके पीछे कौन है, और अगर आप गायब हो गए तो क्या होगा?
One person, plus contributors. The core is MIT and runs on your machine, so if we vanish your install keeps working and your data stays in a DuckDB file you own. The paid layer is a separate closed package. Ask for the fleet brief and it names the legal entity, the largest deployment we run today, and the reference count, with no rounding.
क्या यह सिक्योरिटी रिव्यू में पास होगा?
For a pilot on non-production machines, usually: MIT source you can audit, local-first storage, single-tenant self-hosted and offline licence verification are the arguments that work. For a regulated production rollout, read the gap list first. SSO, RBAC beyond owner and member, SOC 2, CAIQ and a third-party pen test are all absent, and that is a two-to-four quarter conversation.