Körs på din dator · agerar bara när du säger till
Kontrollplanet
för AI-agenter
- Se varje agent.
- Förstå varje åtgärd.
- Stoppa det som inte borde hända.
ClawMetry läser de 26 agent-runtimes som ditt team redan kör, från Claude Code och Cursor till Codex och OpenClaw, direkt ur filerna de redan skriver. Inget behöver läggas till i agenten.
$ pip install clawmetry && clawmetry
7 dagar, alla runtimes, inget kort. Sedan $9 eller $19 per nod och månad.
“claude_code: 84 tool calls, no file changes, not advancing.” Stop or Pause this agent from the ClawMetry dashboard or device.
Verbatim record, not a mockup. A real detection from the laptop ClawMetry was built on. The steps, the counts and the message are what the daemon wrote to disk.
❯ Supported agent runtimes
Don't see the agent harness you use?
Just share it and we'll add support in ~2 days. Leave your email and we'll ping you the moment it's live, plus 2 months of Pro, on us.
We only use your email to notify you and issue the Pro credit. No lists, no spam.
Uppmätt, en installation, fyra månader
Den flaggar agenter som kör fast,
inte agenter som kostar pengar.
En lång och dyr session är ofta ditt bästa arbete, så ett verktyg som jagar stora siffror skulle döda fel sak. ClawMetry tittar på om en agent producerar något alls. Samma laptop, fyra månader, båda fallen sida vid sida.
Fungerar · aldrig flaggad
$171.58
The most expensive session of the four months. It ran long and cost real money, and it was writing code the whole time. ClawMetry left it alone, which is the correct answer.
Flaggad · kör fast
$175.10
Every one caught for the same reason: tool calls with no file changes, the same failure repeating, or a loop that stopped advancing. Most of them cost less than the session on the left.
Detektorer varnar. De agerar inte. Alla sju sessionerna kördes klart. Flaggan är en avisering, inte en utlösare. Inget stoppas om inte en människa stoppar det, eller om du själv sätter ett utgiftstak och en agent passerar det.
165 sessions and $826.47 of agent spend on one developer’s laptop, April to August 2026. One machine, not a customer aggregate. Yours will look different, which is the reason to read your own.
Se det i praktiken
En skärm. Allt som händer i dina agenter.
Hålen finns i tabellen
Vad vi kan göra, per runtime.
Alla leverantörer i den här kategorin säger skyddsräcken. Här är hela matrisen, inklusive de tomma cellerna.
| Runtime | Observera | Blockera innan körning | Avbryta under körning | Kostnad i dollar |
|---|---|---|---|---|
| OpenClaw, NVIDIA NemoClaw, Goosefree forever | ✓ | via proxy | ✓ | ✓ |
| Claude Codethe only pre-execution tool gate | ✓ | ✓ | ✓ | ✓ |
| Codex, OpenCode, Aider | ✓ | via proxy | ✓ | ✓ |
| Cursorone IDE process holds every session | ✓ | – | – | – |
| GitHub Copilotbilled in vendor credits, not USD | ✓ | – | – | – |
| NanoClaw, PicoClaw, Kimi CLIno model id on disk | ✓ | – | – | – |
| Qwen, Hermes, Pi, Deep Agents, n8n, Antigravity, Grok, QM, DeepSeek Harness, Exo |
✓ | via proxy | – | ✓ |
Blockera innan körning
Claude Code gets a real pre-execution gate: a PreToolUse hook parks the call before the tool fires. Everything routed through the ClawMetry proxy gets spend refused with a 429 before tokens are spent.
Avbryta under körning
A gateway kill for OpenClaw, and SIGSTOP then SIGKILL against the process tree for the CLI runtimes, with a guard so a recycled pid is never the one we hit. macOS and Linux. Windows has no SIGSTOP, so pause and resume do not exist there.
Granska efteråt
Every event carries a SHA-256 chain over its immutable fields, per node, with a verifier command. Approval decisions land in an append-only log. Works on every runtime.
Innan du lägger en daemon på din laptop
Vad det gör med datorn,
och vad som lämnar den.
Uppmätt på samma laptop, inte uppskattat.
Avtryck
clawmetry uninstallThe query server binds to loopback only, with a one-time 32-hex token and a discovery file at mode 0600. It is why the dashboard can read the store without holding the writer lock.
Exakt vad som lämnar datorn
Never. These stay in the local file.
The key is generated on the node and never leaves it. Decryption happens in your browser. Compelled by a subpoena, we hand over a blob we cannot open, plus the node id, the version and some counters.
Den lokala filen är i klartext
Everything is sealed in transit and at rest in our cloud, and it is not encrypted on your own disk. The DuckDB file carries default user permissions. Anything running as your user can read it.
Maskeringen fallerar öppet
Secrets are fingerprinted at ingest by default, before disk. It is pattern-based, and on an internal error it keeps the original value rather than dropping data. It is tuned for credential shapes, not customer PII.
En ansluten nod kan stoppas på distans
If you turn cloud on, Stop, Pause and Resume are reachable from the dashboard and the desk device for any node on the account. That is the feature. Run local-only and no such channel exists.
Starred by the people building AI
Engineers and founders from OpenAI, Google, PostHog and more have starred ClawMetry on GitHub. One of them helped build it.
Tre ställen att köra det på
Cloud är valfritt.
Det har alltid varit det.
Daemonen beräknar allt till en DuckDB-fil på din egen disk. Var dashboarden bor efter det är ditt val, och priset är detsamma vilket du än väljer.
01 · Local only
Inget lämnar datorn
Included in the MIT core
The dashboard reads the local file through a loopback query server. There is no account, no sync and no destination to point at.
- Network destinations: none
- Inbound ports opened: 0
- Free forever for OpenClaw, NVIDIA NemoClaw and Goose
02 · Our cloud
Förseglat innan det lämnar datorn
$19 per node, per month
The snapshot is encrypted on the node with a key generated there and never sent. Your browser decrypts it. Subpoena us and we hand over a blob we cannot open.
- AES-256-GCM, key held on the node
- Decryption happens client side
- Stop, Pause and Resume reach any node on the account
03 · Self-hosted
Din infrastruktur, single tenant
$190 per node, per year
One container serves the UI and the ingest API on your own network, with node tokens and admin auth. Licences verify offline against an embedded Ed25519 key you can fingerprint and compare.
- No calls to clawmetry.com beyond an off-by-default version ping
- Same feature set, same runtimes, same rate
- Two months free against the monthly price
Priset ändras inte med driftsformen. Egen drift kostar $19 per nod och månad eller $190 per nod och år, precis som Cloud-planen, eftersom du betalar för programvaran och inte för våra servrar. Det som ändras är vem som håller datan och vem som kör containern. Köp en nyckel för egen drift utan att prata med någon.
Ett pris, en mätare
Räkna ut din summa
innan du pratar med någon.
7 days, every runtime, no card
$19per node, per month
Pro, billed monthly. Starter is $9 and covers fewer features, not fewer runtimes. Annual is $190 per node, two months free. Free forever for OpenClaw, NVIDIA NemoClaw and Goose.
Start the trial- Every runtime, including Claude Code, Codex and Cursor.
- Cloud or fully self-hosted, at the same rate. Unlimited chat channels.
- Waste flags, error triage, cost optimizer, OTLP export, tool policy.
- Cancel any time in Stripe. No contract, no seat count.
Already decided? Buy now and install after. Your key is on the next screen.
Vad det kostar dig
Räkna de datorer som ska köra daemonen, inte personerna som ska titta på den.
$551 $6,612 per year · 29 nodes
A node is a machine running the daemon and reporting a heartbeat. The unit of attribution is a machine, so spend maps to a laptop, not to a team. The same number applies self-hosted, so you can price a deployment on your own infrastructure off this figure without asking us. Ephemeral CI runners are not yet specified; the fleet brief carries the rule in writing before you sign.
För dem som äger risken
Att köra det här i hela företaget.
Dina utvecklare installerade Claude Code, Cursor, Codex och Copilot förra kvartalet. Ingen upphandlade dem, och alla har ditt repo och dina nycklar.
Inget att installera i agenten
Each runtime is read from the session store it already writes. No SDK, no wrapper, no second agent on the laptop, nothing a developer has to opt into or can forget.
A control layer that governs only its own SDK is blind to everything a developer runs outside it.Självhostat är svaret på SSO
SSO does not exist yet. Single-tenant self-hosted does: one container serves the UI and the ingest API, with node tokens and admin auth, and licences verify offline against an embedded Ed25519 key you can fingerprint and compare.
A self-hosted deployment makes no calls to clawmetry.com beyond an off-by-default version ping.Det passar nätverket du redan har
SIEM and syslog export in CEF or JSON over TCP, UDP or TLS, emitted daemon-side because the cloud never holds plaintext. Corporate TLS interception is supported, with a doctor command that walks DNS, TCP, proxy and TLS in order.
In: your collector feeds us over OTLP. Out: full-event SIEM export. Not yet: correlated spans carrying your trace ids.Flottutrullning sker manuellt i dag
There is no Helm chart, no Terraform provider and no Intune or Jamf package. If a daemon on developer laptops is a non-starter, run the enforcement proxy centrally and govern spend without touching an endpoint.
Auto-update ships on by default. CLAWMETRY_AUTO_UPDATE=0 turns it off. No staged rollout, no version pinning.Frågor vi får varje gång.
Kan ni blockera något innan det körs, eller bara berätta att det kördes?
Both, and the split is in the table above. Claude Code gets a genuine pre-execution tool gate, and anything routed through the proxy gets spend refused with a 429 before tokens are spent. For the other runtimes it is detection plus process control: we can see it and end it, we cannot veto the call it already made.
Stoppar det mina agenter på egen hand?
No. Detectors write a warning and stop there. On the reference install every flagged session ran to completion. A run ends only when a person ends it, or when you have set a spend cap yourself and an agent crosses it.
Förändrar det hur mina agenter körs?
Read-only by default. Two things you opt into change that: the proxy, a separate process you point one env var at, and approval gates, where ClawMetry adds a gate to the runtime’s own permission system and removes only what it added.
Vad händer när min testperiod tar slut?
The paid runtimes stop being read and the free three keep working. Entitlements are a commercial boundary, not a technical one. We do not hard-block a running fleet on a licence check.
Vilka står bakom detta, och vad händer om ni försvinner?
One person, plus contributors. The core is MIT and runs on your machine, so if we vanish your install keeps working and your data stays in a DuckDB file you own. The paid layer is a separate closed package. Ask for the fleet brief and it names the legal entity, the largest deployment we run today, and the reference count, with no rounding.
Klarar detta en säkerhetsgranskning?
For a pilot on non-production machines, usually: MIT source you can audit, local-first storage, single-tenant self-hosted and offline licence verification are the arguments that work. For a regulated production rollout, read the gap list first. SSO, RBAC beyond owner and member, SOC 2, CAIQ and a third-party pen test are all absent, and that is a two-to-four quarter conversation.